Working With Alarms; Setting Up A Color Alarm; Setting A Color Alarm Using The Menu System; Setting A Color Alarm Without Using The Menu System - FLIR ThermaCAM EX300 User Manual

8.4

Working with alarms

8.4.1

Setting up a color alarm

8.4.1.1

Setting a color alarm using the menu system

Step Action
1 Press MENU/YES to display the vertical menu bar.
2 Point to Meas. mode on the vertical menu bar and press MENU/YES.
3 Enable the color alarm and select its mode – Above or Below.
4 Set the temperature by moving the navigation pad up/down.
5 Press MENU/YES to confirm and leave the dialog box.
8.4.1.2

Setting a color alarm without using the menu system

Step Action
1 Press SEL until the color alarm symbol and the color alarm temperature in the top
right hand corner of the screen is selected.
The color alarm symbol is an arrow pointing upwards or downwards.
2 Press the navigation pad up/down to change the color alarm temperature.
Publ. No. 1558439 Rev. a156 – ENGLISH (EN) – February 28, 2006
8 – Tutorials
8
45