Setting Up A Color Alarm Without Using The Menu System; Setting Up A Silent Alarm (I.e. A Visual Alarm) - FLIR ThermaCAM E4 Operator's Manual

Step
4
5
6
7
7.4.2.2

Setting up a color alarm without using the menu system

Step
1
2
7.4.3

Setting up a silent alarm (i.e. a visual alarm)

Step
1
2
3
4
5
6
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004
Action
For Alarm, select one of the following by pressing the navigation pad left/right:
Above
■
Below
■
For Alarm output, select Color only by pressing the navigation pad left/right.
Specify the Alarm temp by pressing the navigation pad left/right. You can also
change the color alarm without using the menu system by pressing the navigation
pad up/down after having selected the temperature result by pressing SEL. A se-
lected temperature result is highlighted in yellow.
➲ Alarm temp will only be available if Update ref temp has been previously se-
lected in the Settings dialog box.
Specify Delta alarm by pressing the navigation pad left/right.
➲ Delta alarm will only be available if Update ref temp has been previously select-
ed in the Settings dialog box.
Action
Press SEL until the color alarm symbol and the color alarm temperature in the top
right hand corner of the screen is selected.
The color alarm symbol is an arrow pointing upwards or downwards.
Press the navigation pad up/down to change the color alarm temperature.
Action
Press MENU/YES to display the vertical menu bar.
Point to Meas. mode and press YES to display the Meas. mode dialog box.
Select Meas. mode by pressing the navigation pad left/right. The alarm function
is typically used together with Area max.
For Alarm, select one of the following by pressing the navigation pad left/right:
Above
■
Below
■
For Alarm output, select Silent by pressing the navigation pad left/right.
Specify the Alarm temp by pressing the navigation pad left/right.
➲ Alarm temp will only be available if Update ref temp has been previously se-
lected in the Settings dialog box.
7.4 – Working with alarms
15