Setting Up A Silent Alarm (I.e. A Visual Alarm); Setting Up An Audible Alarm - FLIR ThermaCAM EX320 User Manual

8.4.3

Setting up a silent alarm (i.e. a visual alarm)

Step Action
1 Press MENU/YES to display the vertical menu bar.
2 Point to Meas. mode and press YES to display the Meas. mode dialog box.
3 Select Meas. mode by pressing the navigation pad left/right. The alarm function
is typically used together with Area max.
4 For Alarm, select one of the following by pressing the navigation pad left/right:
Above
■
Below
■
5 For Alarm output, select Silent by pressing the navigation pad left/right.
6 Specify the Alarm temp by pressing the navigation pad left/right.
➲ Alarm temp will only be available if Update ref temp has been previously selected
in the Settings dialog box.
7 Specify Delta alarm by pressing the navigation pad left/right.
➲ Delta alarm will only be available if Update ref temp has been previously selected
in the Settings dialog box.
8.4.4

Setting up an audible alarm

Step Action
1 Press MENU/YES to display the vertical menu bar.
2 Point to Meas. mode and press YES to display the Meas. mode dialog box.
3 Select Meas. mode by pressing the navigation pad left/right. The alarm function
is typically used together with Area max.
4 For Alarm, select one of the following by pressing the navigation pad left/right:
Above
■
Below
■
5 For Alarm output, select Beep by pressing the navigation pad left/right.
6 Specify the Alarm temp by pressing the navigation pad left/right.
➲ Alarm temp will only be be available if Update ref temp has been previously
selected in the Settings dialog box.
7 Specify Delta alarm by pressing the navigation pad left/right.
➲ Delta alarm will only be available if Update ref temp has been previously selected
in the Settings dialog box.
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
8 – Tutorials
8
47