Error Messages - Brother MFC-J6510DW Service Manual

2.3.2 Error Messages

Error Message
B&W Print Only
BT Call Sign On
(U.K. only)
MFC-J6910DW
Cannot Detect
Cannot Print
Comm.Error
Connection Fail
Cover is Open
Data Remaining
Disconnect device
from front connect or
& turn machine off &
then on
Disconnected
Document Jam/
Too long
DR Mode in Use
High Temperature
Hub is Unusable.
Image Too Long.
Image Too Small.
Contents
One or more of the color ink cartridges have
reached the end of their life.
BT Call Sign is set to ON, so the Receive Mode
cannot be changed.
Cannot detect an ink cartridge correctly.
The service life of any ink cartridge has
expired. Or a paper jam or an abnormality has
occurred in the machine.
Fax communication error.
Failed to connect to the other end.
Any of the ink cartridge cover, scanner cover
and ADF cover is opened.
Memory full so that data processing is
impossible.
A USB device not supported by the machine is
connected or the connected USB device is
defective.
Fax communications line not connected or data
send/receive not possible.
Document jam or too long document in the
ADF.
The Distinctive Ringing mode is ON so that the
Receive Mode cannot be changed.
The room temperature is high.
A USB hub or a hub built-in USB device is
connected.
In using the PhotoCapture Center, the image is
too long to correct or trim.
In using the PhotoCapture Center, the image is
too small to correct or trim.
2-13
Error Code Refer to:
27, 28, 29 p. 2-29
- Section
2.4.9.8
20, 21, 22, 23 p. 2-27
-
- Section
2.4.9.3
- Section
2.4.9.3
2F p. 2-31
A1 p. 2-52
A4 p. 2-54
- Section
2.4.10.4
- Section
2.4.10.3
- Section
2.4.9.3
A2 p. 2-52
A3 p. 2-53
BF p. 2-57
EA p. 2-59
- Section
2.4.9.8
40 p. 2-36
- Section
2.4.10.3
-
-
Confidential