Recording Paper Size Error. (Except During Fax/List Printing) (That The Recording Paper Width Is Less Than The Specified One Is Detected By The Paper Width Sensor.); Recording Paper Jam In Paper Feeding. (The Paper Width Sensor Has Failed To Detect The Leading Edge Of Paper.) - Brother MFC-J6510DW Service Manual

Error Code 81
Wrong Paper Size
Wrong Tray Setting*
Recording paper size error. (Except during fax/list printing) (That the recording paper width is
less than the specified one is detected by the paper width sensor.)
User Check
- Check whether the recording paper being used is within the specification.
- Check that dark recording paper is not used.
Step
1 CR encoder strip stained
2 Carriage motor defective
3 Paper width sensor defective
4 Main PCB defective
Error Code 82
Paper Jam
Recording paper jam in paper feeding. (The paper width sensor has failed to detect the leading
edge of paper.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
- Check that dark recording paper is not used.
Step
1
Paper width sensor defective
2 Paper feed roller worn out
3
Main PCB defective
Cause
Replace the encoder strip.
Replace the carriage motor.
Replace the carriage PCB ASSY.
Replace the main PCB ASSY.
Cause
Replace the carriage PCB ASSY.
Replace the engine unit.
Replace the main PCB ASSY.
2-46
LCD
*Models with paper tray #2
Solution
LCD
Solution
Confidential