If You Replace The Ink Absorber Box Or Flushing Box; 1 ] Reset Each Of The Purge And Flushing Counts; If You Replace The Control Panel Assy, Control Panel Pcb Or Lcd Unit; 1 ] Adjust The Touch Panel (Function Code 78) (For Models With Touch Panel) - Brother MFC-J6510DW Service Manual

Injet mfc
Hide thumbs Also See for MFC-J6510DW:
Table of Contents

Advertisement

4.4

IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX

When either the ink absorber box or flushing box is replaced, you should replace both of them.

[ 1 ] Reset each of the purge and flushing counts

(1) Switch the machine to the maintenance mode. (Refer to
(2) Press the 8 and 0 keys in this order.
(3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
(4) Press the 2, 7, 8, and 3 keys in this order to reset the purge (or flushing) count.
(5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
(6) Press the 9 key twice to exit from the maintenance mode.
Tip: This machine counts all purge operations and flushing operations performed since
produced in order to prevent the ink absorber box and flushing box from overflowing with
drained and flushed ink, respectively. An initial purge, for example, advances the count by 569.
When the purge or flushing count approaches 15,350 or 698,469,595, respectively, the
"MACHINE ERROR 46" appears and further purge or flushing operations are prohibited.
Replace the ink absorber box and flushing box, and then reset their counts.
4.5
IF YOU REPLACE THE CONTROL PANEL ASSY, CONTROL PANEL
PCB OR LCD UNIT

[ 1 ] Adjust the touch panel (Function code 78) (For models with touch panel)

Refer to
Chapter 5, Section
Note: This operation is not required when only the control panel PCB is replaced.

[ 2 ] Check LCD operation (Function code 12)

Refer to
Chapter 5, Section
Note: This operation is not required when only the control panel PCB is replaced.

[ 3 ] Check the operation of the control panel PCB (Function code 13)

Refer to
Chapter 5, Section
Note: This operation is not required when only the LCD unit is replaced.
5.1.4.29.
5.1.4.7.
5.1.4.8.
4-43
Chapter
5.)
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j6710dwMfc-j6910dw

Table of Contents