Transfer Of Received Fax Data And Log Information (Function Code 53) (User-Accessible) - Brother MFC-J6510DW Service Manual

5.1.4.13 Transfer of Received FAX Data and Log Information
(Function code 53) (User-accessible)
Function
This function transfers received FAX data and log information to another machine. It is useful
when the machine cannot print received data due to the printing mechanism defective.
This function also transfers the activity report, the communications list, and the equipment' log
of the machine as fax data.
NOTE: The number of files that can be transferred at a time is 99. To transfer 100 files or more,
carry out the following procedure more than one time.
TIP: If there are both color and monochrome data in a file to be transferred, the monochrome
data will be transferred first. If the receiver machine does not support the color function, the
sender machine cannot transfer color data, resulting in an error.
TIP: If using this function results also in an error, use Function code 46 to save received FAX
data into an external memory. (Refer to
Operating Procedure
(1) Press the 5 and 3 keys in this order in the initial stage of the maintenance mode.
The "FAX TRANSFER" appears on the LCD.
(2) To check the number of received files, press the 1 key.
The "1.NO. OF JOBS" appears on the LCD.
Press the OK key, and the number of received files appears, just as "NO. OF JOBS: 10."
Pressing the Stop/Exit key returns the machine to the "FAX TRANSFER" state.
(3) Select data to transfer as follows.
To transfer the activity report only, press the 2 key.
The "2.ACTIVITY" appears.
To transfer received files (together with the activity report), press the 3 key.
The "3.DOCUMENTS" appears. Note that if there is no received file, the "NO
DOCUMENTS" appears.
To transfer the communication list for the latest communication, press the 4 key.
The "4.COM.LIST (NEW)" appears.
To transfer the communication list for the last three errors, press the 5 key.
The "5.COM.LIST (ERR3)" appears.
To transfer the equipment's log, press the 6 key.
The "6.MNT77 LIST" appears.
To transfer the user setting information, press the 7 key.
The "7.USER SETTINGS" appears.
To transfer the caller ID history, press the 8 key.
The "8.CALLER ID HIST" appears.
To transfer the outgoing call history, press the 9 key.
The "9.OUTGOING CALL" appears.
To transfer the wireless LAN data, press the 0 key.
The "0.WLAN DATA" appears.
Section 5.1.4.11.)
5-25 Confidential