Printout Of Prn/Jpeg Files In Memory Card (Function Code 61) - Brother MFC-J6510DW Service Manual

5.1.4.18 Printout of PRN/JPEG Files in Memory Card (Function code 61)

Function
This procedure prints PRN files and JPEG files stored in a memory card supported by
PhotoCapture Center.
The following three print modes are available.
- Printing the specified file only once
- Printing all files repeatedly (PRN files and JPEG files stored in a memory card)
- Printing the specified file repeatedly
File requirements
PRN files having the name "file_**.prn"
JPEG files having the name "file_**.jpg"
(** should be a numeral ranging from 01 to 63. Other file names will be ignored.)
The maximum number of files is 63.
Operating Procedure
-- Printing the specified file only once --
(1) Press the 6 and 1 keys in this order in the initial stage of the maintenance mode.
The "MAINTENANCE 61" appears on the LCD.
(2) To print a PRN file, press the # key; to print a JPEG file, press the * key. Then enter the
numeral (two digits from 01 to 63) in the file name to be printed in succession, using the
numerical keys.
The machine prints the specified file once.
(3) Upon completion of printing, the machine goes back to step (2).
Printing the Stop key halfway through printing immediately stops printing and returns the
machine to the initial stage of the maintenance mode.
-- Printing all files repeatedly --
(1) Press the 6 and 1 keys in this order in the initial stage of the maintenance mode.
The "MAINTENANCE 61" appears on the LCD.
(2) To print PRN files, press the #, 0 and 0 keys; to print JPEG files, press the *, 0 and 0 keys
in this order.
The machine prints files, starting from the first one. After printing of all files, it repeats
printing from the first file.
(3) To stop printing PRN files, press the #, 9 and 9 keys; to stop printing JPEG files, press the
*, 9 and 9 keys in this order.
After completion of printing of the current file, the machine stops repeated printing.
Pressing the Stop key halfway through printing immediately stops printing and returns the
machine to the initial stage of the maintenance mode.
5-38 Confidential