Brother MFC-J6510DW Service Manual page 53

Error Code 0E
Paper Jam
In duplex printing, a sensor error has occurred during printing on the second side. (During
switchbacking, the combination of the sensing states of the registration sensor, switchback
paper sensor, and paper feed sensor has become unexpected.)
User Check
- Remove the jammed paper.
- Check whether the recording paper being used is within the specification.
- Check that the recording paper is not curled.
- Clean the switchback (SB) roller.
Step
1 Switchback paper detection
actuator caught on the
surrounding parts
2 Paper feed sensor actuator caught
on the surrounding parts
3 Registration sensor actuator
caught on the surrounding parts
4 Switchback paper sensor
defective
5 Paper feed sensor defective
6 Registration sensor defective
7 Main PCB defective
Cause
Reposition the actuator.
Reposition the actuator.
Reposition the actuator.
Replace the sensor PCB ASSY.
Replace the PF encoder/PF sensor harness unit.
Replace the registration sensor PCB ASSY.
Replace the main PCB ASSY.
2-23
LCD
Solution
Confidential