Brother MFC-J6510DW Service Manual page 127

(10) After disconnecting flat cables, check that each cable is not damaged at its end or short-
circuited.
When connecting flat cables, do not insert them at an angle. After insertion, check again
that the cables are not at an angle.
(11) If ink gets on your skin or gets into your eyes or mouth, you need the following treatment.
• If ink gets on your skin, wash it off immediately with soap and water.
• If ink gets into your eyes, flush them immediately and thoroughly with water. If left
untreated, the eyes may become bloodshot or mildly inflamed. If you feel any
discomfort, consult a doctor immediately.
• If ink gets into your mouth, immediately spit it out and consult a doctor.
(12)
DOUBLE POLE/NEUTRAL FUSING
(13) After completion of reassembly, it is recommended that the dielectric voltage withstand test
and continuity test be conducted.
(14) Before packing the machine for sending it back to the user after repairs, be sure to clean the
flushing guide with a cleaner stick as shown below to prevent ink splashing during
transportation.
CAUTION
Flushing guide
3-2
Cleaner stick
(3_000)
Confidential