Checking Of Cis Travel (Function Code 59) - Brother MFC-J6510DW Service Manual

5.1.4.17 Checking of CIS Travel (Function code 59)

Function
This procedure allows you to check the movement of the CIS unit integrated in the scanner
cover (scanner unit). The CIS unit travels to the three positions--the white reference film
position, scanning start and end positions.
Operating Procedure
-- Check the movement of the CIS unit --
(1) Press the 5 and 9 keys in this order in the initial stage of the maintenance mode.
Simplex scanning models
The "1:MONO 2:COLOR?" appears on the LCD.
Duplex scanning models
The "CIS 1:FB 2:ADF" appears on the LCD.
Press the 1 key to display "1: MONO 2:COLOR?"
(2) To call up the CIS travel menu, press the 1 key.
(The "2:COLOR" is for checking scanning clocks at the factory, so do not access it.)
The "RESO TYPE SET 1" appears on the LCD.
(3) Press the OK key (PHOTO CAPTURE key for models without OK key).
The "LED PWM : **" appears on the LCD.
(4) Press the OK key (PHOTO CAPTURE key for models without OK key).
The "G PULSE :
(5) Press the OK key (PHOTO CAPTURE key for models without OK key).
The "1:WHT 2:FRT 3:MV" appears.
(6) Press the 3, 1, or 2 key, then press the OK key (PHOTO CAPTURE key for models
without OK key).
The CIS unit moves to the scanning end position, white reference film position, or scanning
start position, respectively.
(7) Press the Stop/Exit key, and the CIS unit returns to the home position.
The machine returns to the initial stage of the maintenance mode.
****" appears on the LCD.
5-37 Confidential