Brother MFC-J6510DW Service Manual page 373

Selector
No.
Prevention of stains on back side of
1 leading edge of paper in borderless
printing
Ink stains reduction mode in printing
2
received faxes, various reports and lists.
Protection of platen from no-paper
3
printing to prevent stains
(Functional restriction on the paper
4
width sensor)
Assurance print 1
5 (Printing with black and cyan inks in
monochrome copy)
Assurance print 2
(Printing with black and cyan inks in
6
monochrome FAX reception and in list
output)
Workaround for false jam detection
7
(Functional restriction on the paper
8
width sensor)
• Selector 1: Prevention of stains on back side of leading edge of paper in borderless printing
Setting this selector to "1" reduces the protruding amount of the leading edge of recording
paper to the platen groove to minimize stains that could be caused by ink mist on the back
side of the leading edge. Enabling this function reduces the throughput than disabling it.
• Selector 2: Ink stains reduction mode in printing received faxes, various reports and lists
When the print density of received faxes, various reports and lists is high in printing, ink
can adhere to the paper feed related rollers, resulting in stains on printed paper. If this
happens, enable this ink stains reduction mode to lower the print resolution for reducing the
adherence of ink.
• Selectors 3 and 4: Protection of platen from no-paper printing to prevent stains (Functional
restriction on the paper width sensor)
The setting made by these selectors applies to such printing that is assumed to be at a high
resolution, that is, printing from a PC or memory card, copying, and printing via
PictBridge.
If these selectors are set to "0, 0," the machine automatically determines the functions of
the paper width sensor depending upon the print resolution selected. Therefore, in low
resolution printing, e.g. when the "Fast" print quality is selected, the paper width sensor is
automatically disabled. On the contrary, in high resolution printing, e.g. when the
"Highest" print quality is selected, the sensor is automatically enabled.
Setting these selectors to "1, 1" disables the paper width sensor to save the sensing time for
higher throughput.
AMS01
(Printing assurance 1)
Function
5-69
Setting and Specifications
0: Disable (default)
0: Disable (default)
No. 3 4
0 0 : Enable (Determine the sensor
function depending upon the print
resolution selected) (default)
0 1 : Enable (Detect the leading edge
plus right and left edges of paper)
1 0 : Enable (Detect the leading edge
of paper)
1 1 : Disable (No paper detection)
0: Disable (default)
0: Disable (default)
No. 7 8
0 0 : Detect both the leading edge and
width of paper (default)
0 1 : Detect both the leading edge and
width of paper
1 0 : Detect only the leading edge of
paper
1 1 : No detection
1: Enable
1: Enable
1: Enable
1: Enable
Confidential