3.9.14 Carriage PCB ASSY, Ink Refill ASSY and Ink Cartridge Detection Sensor
PCB
Carriage PCB ASSY (Carriage PCB with head flat cables)
(1) Remove the carriage PCB ASSY from the head/carriage unit, by performing steps (7)
through (11) in
(2) Release the head flat cables from the cable guides on the tube support plate and take them
out together with the flat core.
Note: When replacing the carriage PCB ASSY, remove the flat core from the old head flat
cables and set it to the new ones.
Section 3.9.2 "Head/Carriage Unit."
Carriage PCB ASSY
Head flat cables
CR guide rail
Tube support plate
3-107
Flat core
Lower cover
Confidential
(3_074)