Brother MFC-J6510DW Service Manual page 178

(7) At the rear of the machine, remove the two screws that secure the two scanner hinges.
(8) Open the scanner cover fully and pull it upward and out of the machine.
Note: Pulling up the scanner cover without fully opening it opens the scanner hinges
suddenly and unexpectedly with great force. It is DANGEROUS!
Hinweis: Wird die Scannerabdeckung nach oben gezogen, ohne sie zuvor vollständig
geöffnet zu haben, schnellen die Scannerscharniere plötzlich und unerwartet mit großer
Kraft nach oben. Dies ist GEFÄHRLICH!
Scanner cover
(Scanner unit)
Document detection/
width & scanning position
(first side) sensors harness
Document scanning
position sensor harness
(second side)*
ADF cover sensor
harness
CIS motor harness
ADF motor harness
Grounding wire
(for ADF drive unit)
Assembling Note: If you replace the scanner cover, acquire the white level data and set the CIS
scanner area (Function code 55), referring to
ADF & document cover ASSY
Scanner
hinge
Grounding wire
(for CIS motor)
Scanner
hinge
Taptite, bind B
M4x12 (black)
Chapter 5, Section
3-53
CIS flat cable (white) for
second side scanning*
CIS flat cable (black)
for first side scanning
Lower cover
*For duplex scanning models
5.1.4.15.
(3_020)
Confidential