Brother MFC-J6510DW Quick Setup Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. MFC-J6510DW
  6. Quick setup manual
Brother MFC-J6510DW Quick Setup Manual

Brother MFC-J6510DW Quick Setup Manual

Hide thumbs Also See for MFC-J6510DW:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Quick Setup Manual
Quick Setup Guide
Start Here
Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
WARNING
CAUTION
1
Unpack the machine and check the components
Most of the illustrations in this Quick Setup Guide show the MFC-J6710DW.
The components included in the box may differ depending on your country.
Safety and Legal
Basic User's Guide
booklet
USB Interface Cable
WARNING
• Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children and dispose of them properly.
• To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is
properly grounded through the standard electrical wiring. Non grounded equipment may cause an
electrical shock hazard, and may cause excessive electrical noise radiation.
CAUTION
(For MFC-J6710DW)
To prevent injuries when moving or lifting this machine, make sure to
use at least two people. Be careful not to pinch your fingers when you
set the machine back down.
a
Remove the protective tape and film covering the machine, and also from
the LCD.
b
Make sure you have all components.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
Starter Ink Cartridges
Installation CD-ROM
Documentation CD-ROM
Telephone Line Cord
Adapter (Australia only)
MFC-J6510DW
MFC-J6710DW
Black
Yellow
Cyan
Magenta
(Approx. 65% yield of the
replacement cartridge) For
details, see Consumable items
in the Basic User's Guide.
Power Cord
Cables vary depending on countries.
Taiwan model is using the power cord
attached on the machine.
Telephone Line Cord Adapter
(Hong Kong only)
Quick Setup Guide
Telephone Line
Cord
ARL/ASA/NZ Version A
1

Advertisement

Table of Contents
loading

Related Manuals for Brother MFC-J6510DW

Summary of Contents for Brother MFC-J6510DW

  • Page 1 Quick Setup Guide Start Here MFC-J6510DW MFC-J6710DW Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2 With both hands, gently press and slide the Note paper length guide a and then the paper side • Save all packing materials and the box in case guides b to fit the paper size. for any reason you must ship your machine. Make sure that the triangular marks c on the •...
  • Page 3 Gently adjust the paper side guides to the Connect the power cord paper with both hands. Make sure that the paper side guides touch the edges of the and telephone line paper. Close the output paper tray cover. Check that the paper is flat in the tray and below the IMPORTANT maximum paper mark a.

  • Page 4: Set Your Country

    Set your country IMPORTANT (Australia and New The telephone line cord MUST be connected Zealand only) to the socket on the machine marked LINE. You must set your country so that the machine works Note correctly on local telecommunication lines in each country.

  • Page 5: Install The Ink Cartridges

    Lift the scanner cover into the open position. Install the ink cartridges Note Make sure you install the Starter Ink Cartridges included with your machine first. Make sure that the power is turned on. The LCD shows No Ink Cartridge. Store the orange protective part in the holder Open the ink cartridge cover a.
  • Page 6 Unpack the ink cartridge. Gently push the back of the ink cartridge Turn the green release lever on the orange marked “PUSH” until it clicks. After all the ink protective packing a clockwise until it clicks to cartridges are installed close the ink cartridge release the vacuum seal.

  • Page 7: Check The Print Quality

    Brother branded ink cartridges. Brother cannot guarantee this optimum performance if ink or ink cartridges of other specifications are used. Brother does not therefore recommend the use of cartridges Set the paper settings other than genuine Brother branded...
  • Page 8 ® (For MFC-J6710DW) If you are using a Windows computer or want Press a or b to choose Tray#1 or Tray#2. to connect your Macintosh using USB, press Press OK. Press a or b to choose Paper Type or Select & Press Setup Wi-Fi? Paper Size.

  • Page 9: Set The Date And Time

    Choose a Receive Mode Set the date and time There are four possible receive modes: Fax Only, The machine displays the date and time, and if you Fax/Tel, Manual and External TAD. set up the station ID, the date and time displayed on For details, see Using Receive Modes in chapter 5 of your machine will be printed on every fax you send.

  • Page 10: Manual Feed Slot

    Press d or c to choose Basic(for VoIP). Press OK. Fax Transmission Report Press Stop/Exit. Your Brother machine is equipped with a Manual Feed Slot Transmission Verification Report that can be used as confirmation that you sent a fax. This report lists the...
  • Page 11 7, and Mac OS X (versions 10.4.11, 10.5.x and 10.6.x). Note ® For Windows Server 2003 (x32/x64 Edition)/2003 R2 (x32/x64 Edition)/2008/2008 R2, visit your model page at http://solutions.brother.com/. For USB interface cable ® Windows , go to page 12 Macintosh, go to page 15 For Wired Network ®...

  • Page 12: For Usb Interface Users

    CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.

  • Page 13: Connect The Usb Cable

    ® Windows Choose Local Connection, and then click Connect the USB cable to the USB socket Next. The installation continues. marked with a symbol. You will find the USB socket inside the machine on the right as shown below. When this screen appears, go to the next step. Carefully guide the USB cable into the cable channel and out the back of the machine.
  • Page 14 Installation Always use the finger holds provided on each Diagnostics located in Start/All Programs/ side of the scanner cover when opening and Brother/MFC-JXXX (where MFC-JXXX is your closing it. model name). The installation will continue automatically.
  • Page 15 Administrator rights. Note • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. • For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. Connect the USB cable Carefully guide the USB cable into the cable channel and out the back of the machine.
  • Page 16 Double-click the Start Here OSX icon to install. Presto! PageManager When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click the...

  • Page 17: For Wired Network Interface Users

    Administrator rights. IMPORTANT If there are any programs running, close them. Note • For the latest drivers and information, visit http://solutions.brother.com/. • The screens may differ depending on your operating system. • The installation CD-ROM includes ScanSoft™ PaperPort™12SE*. This software supports ®...
  • Page 18 CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.
  • Page 19 Wired Network ® Windows When this screen appears, choose Change The installation of the Brother drivers will the Firewall port settings to enable network automatically start. The installation screens connection and continue with the appear one after another. installation. (Recommended) and click Next.
  • Page 20 • If an error message appears during the PaperPort™11SE installed, please purchase the software installation, run the Installation Brother NL-5 pack which is a multiple PC license Diagnostics located in Start/All Programs/ agreement pack for up to 5 additional users. To...
  • Page 21 Note • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. • For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. • If you have previously set up your machine for...
  • Page 22 Please wait for the software to install, it will take about 30 seconds. After the installation, the Brother software will search for the Brother device. If the machine is configured for your network, choose the machine from the list, and then click...
  • Page 23 • You can find your machine’s MAC Address When Presto! PageManager is installed OCR (Ethernet Address) and IP Address by printing capability is added to Brother ControlCenter2. You out the Network Configuration List. See can easily scan, share and organize photos and Printing the Network Configuration List in the documents using Presto! PageManager.

  • Page 24: For Wireless Network Users

    Ethernet for a faster data transfer or USB for the fastest throughput speed. Although the Brother MFC-J6510DW and MFC-J6710DW can be used in both a wired and wireless network, only one of the connection methods can be used at a time.
  • Page 25 Choose your wireless setup method The following instructions will offer two methods for setting up your Brother machine on a wireless network. If you began the wireless setup from step 8 on page 8 (for Macintosh and mobile devices) go to method a (Setup Wizard).

  • Page 26: For Macintosh Users

    SSID you wrote down in step 19-a Mobile Device users: When using applications on page 25, then press OK. such as AirPrint or Brother iPrint&Scan with your If the wireless access point/router of the machine, please refer to the application’s User’s Guide.
  • Page 27 LCD will show the wireless signal strength of your access point/router. To install MFL-Pro Suite, continue to Place the Brother machine within range of your step 21. WPS or AOSS™ access point/router. The range may differ depending on your ®...

  • Page 28: Troubleshooting

    For Wireless Network Users Troubleshooting Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. How can I find the wireless security information (SSID and Network Key) 1) You should see the documentation provided with your wireless access point/router.
  • Page 29 The security information (SSID/Network Key) is incorrect. Reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother TS-05 machine supports the use of the first WEP key only.

  • Page 30: Wireless Network

    If the language the User Account Control screen appears, screen appears, choose your language. click Allow or Yes. Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.
  • Page 31 Wireless Network ® Windows Choose Wireless Network Connection, and Choose your machine from the list, and then then click Next. click Next. Note When this screen appears, choose Change • If your wireless settings fail, the Wireless the Firewall port settings to enable network Device Setup Wizard will appear during the connection and continue with the installation of MFL-Pro Suite.
  • Page 32 Wireless Network ® Windows The installation of the Brother drivers will Finish and restart automatically start. The installation screens appear one after another. IMPORTANT Click Finish to restart your computer. After DO NOT cancel any of the screens during the restarting the computer, you must be logged on installation.
  • Page 33 If you want to use more than 2 PCs with ScanSoft™ PaperPort™12SE or ScanSoft™ PaperPort™11SE installed, please purchase the Brother NL-5 pack which is a multiple PC license agreement pack for up to 5 additional users. To purchase the NL-5 pack, contact your authorized Brother dealer or contact Brother customer service.
  • Page 34 • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/. The Brother software will search for the Brother device in your wireless network. If the machine • For Mac OS X 10.4.0 to 10.4.10 users, upgrade is configured for your network, choose the to Mac OS X 10.4.11 - 10.6.x.
  • Page 35 Note When Presto! PageManager is installed OCR • You can find your machine’s MAC Address capability is added to Brother ControlCenter2. You (Ethernet Address) and IP Address by printing can easily scan, share and organize photos and out the Network Configuration List. See documents using Presto! PageManager.

  • Page 36: Install Optional Applications

    Install Optional Applications ® Windows Install FaceFilter Install FaceFilter Studio Studio/BookScan & Help (For Hong Kong/ Whiteboard Suite Taiwan users, installation supported by Reallusion, CD-ROM includes FaceFilter Studio Help) FaceFilter Studio is an easy-to-use borderless photo To get instructions on how to use FaceFilter Studio, printing application.

  • Page 37: For Network Users

    For Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

  • Page 38: Replacement Consumables

    The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

This manual is also suitable for:

Mfc-j6710dw

Table of Contents