11 ] Switch Back To Standby; 12 ] Replace The Ink Cartridges With The Protective Part; 13 ] Obtain Machine Information At The User Site (Instruction To The End User) - Brother MFC-J6510DW Service Manual

[ 11 ] Switch back to standby

After completion of adjustments, disconnect the USB cable and press the 9 key twice to return
to the standby state.
Note: Be sure to disconnect the USB cable first. Returning to standby without disconnecting the
USB cable runs "Found New Hardware Wizard" that starts USB driver installation.

[ 12 ] Replace the ink cartridges with the protective part

Remove all four ink cartridges and set the protective part instead. Check that the right-hand
latch fits in the hole provided in the ink refill ASSY.

[ 13 ] Obtain machine information at the user site (Instruction to the end user)

When the user receives the repaired machine, he/she needs to obtain the head calibration data
into his/her PC at the user site. The service personnel should contact the user to instruct him/her
to perform the following procedure.
Windows
(1) On the user computer, click Start | Settings | Printers to display the Printers window.
(2) Right-click the Brother Printer driver icon to display the pull-down menu.
(3) Click Properties | Print Settings | Advanced | Other print options | Retrieve Printer's
Color Data.
(4) Check that the Retrieve Printer's Color Data check box is selected.
(5) Click Retrieve Printer's Color Data.
(6) Wait for the dialog to appear and click OK.
Macintosh
(1) On the user Mac, display the printer list and select the repaired machine.
(2) Select Open Print Queue | Printer Setup | Utility | Open Printer Utility.
(3) From the menu bar, select Control | Color Calibration.
(4) Wait for the dialog to appear and click OK.
Protective part
4-29
(Protective_part_M11)
Confidential