Checking Of Cis Travel And Specifying Of Cis Type (Function Code 59) - Brother DCP375CW Service Manual

9.4.17 Checking of CIS Travel and Specifying of CIS Type (Function code 59)

Function
This procedure allows you to check the movement of the CIS unit integrated in the scanner
cover (scanner unit). The CIS unit travels to the three positions--the white reference film
position, scanning start and end positions.
It also allows you to specify the CIS type into the EEPROM on the main PCB. If you replace
the scanner cover or the main PCB, you need to specify the CIS type according to the procedure
given below.
Operating Procedure
-- Check the movement of the CIS unit --
(1) Press the 5 and 9 keys in this order in the initial stage of the maintenance mode. For models
without numerical keypad, enter 5 and 9 in this order using the
The "1:MO 2:CO 3:CHG?" appears on the LCD.
(2) To call up the CIS travel menu, press the 1 key. For models without numerical keypad,
enter 1 using the
(The "3:CHG" is for specifying the CIS type, as described on the next page. The "2:CO" is
for checking scanning clocks at the factory, so do not access it.)
Models except DCPJ140W
The "0:30 1:60 2:12 1" appears on the LCD.
DCPJ140W
The "RESO TYPE SET1" appears on the LCD."
(3) Press the OK key (Photo Capture key for models without OK key).
The "LED PWM :
(4) Press the OK key (Photo Capture key for models without OK key).
The "G PULSE :
(5) Press the OK key (Photo Capture key for models without OK key).
The "1:WHT 2:FRT 3:MV" appears.
(6) Press the 1, 2, or 3 key, then press the OK key (Photo Capture key for models without
OK key). For models without numerical keypad, enter 1, 2, or 3 using the
keys, and then press the OK key again.
The CIS unit moves to the scanning end position, white reference film position, or scanning
start position, respectively.
(7) Press the Stop/Exit key, and the CIS unit returns to the home position.
The machine returns to the initial stage of the maintenance mode.
, and OK keys.
∗∗
" appears on the LCD.
∗∗∗∗
" appears on the LCD.
9-37
, and OK keys.
, and OK
Confidential