If You Replace The Ink Absorber Box Or Flushing Box; 1 ] Reset Each Of The Purge And Flushing Counters - Brother DCP6690CW Service Manual

7.5

IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX

When either the ink absorber box or flushing box is replaced, you should replace both of them.

[ 1 ] Reset each of the purge and flushing counters

(1) Switch the machine to the maintenance mode using the steps below. (Refer to
Models without touch panel
Press the Menu and Black Start (Mono Start) keys in this order. Next press the
four times.
Models with touch panel
Press the Menu key on the touch panel and the Black Start (Mono Start) key on the
control panel. Next press the Scan key four times.
TIP: When the touch panel is inoperable, simultaneously press the Scan and Copy keys on
the control panel, instead of the Menu key, and press the Black Start (Mono Start) key.
Next press the Scan key four times.
TIP: Models equipped with a numerical keypad on the control panel can enter the
maintenance mode in the same way as conventional models; that is, by pressing the Menu,
*, 2, 8, 6 and 4 keys in this sequence.
The machine beeps for approx. one second and displays "
LCD, indicating that it is placed in the initial stage of the maintenance mode, a mode in
which the machine is ready to accept entry from the keys.
(2) Press the 8 and 0 keys in this order in the initial stage of the maintenance mode.
(3) Press the Black Start (Mono Start) key several times until the purge (or flushing) count
appears on the LCD.
(4) Press the 2, 7, 8, and 3 keys in this order to reset the purge (or flushing) count.
(5) Press the Stop/Exit key to return to the initial stage of the maintenance mode.
(6) Press the 9 key twice to exit from the maintenance mode.
Tip: This machine counts all purge operations and flushing operations performed since
produced in order to prevent the ink absorber box and flushing box from overflowing with
drained and flushed ink, respectively. An initial purge, for example, advances the counter by
140 + 332 = 472.
When the purge or flushing counter approaches 12480 or 619318182, respectively, the
"MACHINE ERROR 46" appears, and further purge or flushing operations are prohibited.
Replace the ink absorber box and flushing box, and then reset their counters.
7-40
Chapter 9.)
key
" on the
Confidential