Selecting The Default Scanning Density ("Density Level" Parameter) - Konica Minolta bizhub 181 User Manual

Utility mode/Fax mode parameters

Selecting the default scanning density ("DENSITY LEVEL" parameter)

1
Display the "FAX TX OPERATION" menu.
– Refer to "Displaying the "FAX TX OPERATION" menu" on
page 5-60.
2
Press the [+] or [,] key until "DENSITY LEVEL" is selected, and then
press the [OK] key.
3
Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The "FAX TX OPERATION" menu appears again.
Fax kit FK-506
5
5-61