Water Pump Inspection; Water Pump Reassembly - Suzuki RG250 Service Manual

INSPECTION
• Inspect the oil seal and the mechanical seal for
damage and crack.
• Check the smoothness of water pump
shaft by
hand.
REASSEMBLY
• Reassemble and remount the water pump in the
reverse order of disassembly and removal and
also carry out the following steps.
• When installing the mechanica l seal, apply the
SUZUKI BOND No. 1207B to the matching
surface.
99000·3 1 140 SUZUKI BOND No.1 207B
• When installing the water pump impeller,
degrease the reverse side of impel ler.
• Tighten the water pump bolt to the specified
torque.
Tightening torque
7 - 9 N'm
(0.7 - 0.9 kg ·ml
COOLING SYSTEM 4·8
Apply SUZUKI Bond No . 1 2078