Valve Inspection; Valve Installation - Suzuki RG250 Service Manual

) ·19 CHASSIS
VALVE
INSPECTION
Inspect the valve after the tire is removed from the
rim, and replace with the new valve if the seal
ru bber has any split or scratch.
Inspect the removed valve core and replace with
a new
one if seal
rubber is abnormally deformed
or worn .
INSTALLATION
Any dust or rust around the valve hole must be
cleaned off. Then instal l the valve in the rim .
CAUTION,
When installing the valve, tighten the nut
CD
by hand as much as possible. Holding the nut
under this condition, tighten the lock nut
@ .
Do not overtighten nut
CD
as this may
distort the rubber packing and cause an ai r
leak.
Vallie
~
Seat