Steering Bearing; Stem Nut - Suzuki RG250 Service Manual

7-33 CHASSIS
BEARING
Place a washer and press in the lower bearing by
using the special tool.
0994 1-74910
St eeri ng bearing installer
App ly grease to the upper and lower bearing races
before remounting the steering stem.
99000-250 10 SUZUKI super grease "A"
STEM NUT
F it t he dust seal to the stem nut.
Tighten the steering stem nut to 40 - 50 N'm
(4. 0 - 5.0 kg-mi.
09940-149 11
I
Steering stem nut wrench
I
Turn the steering stem bracket about five or six
times to the
leh
and right until it locks in position
so that the taper roller bearing w ill be seated
properly.
Turn back the stem nut by ~ - % turn.
NOTE:
This adju stment w ill vary from motorcycle to
motorcycle.
1/4 - 1/2 turn