Suzuki RG250 Service Manual page 73

3·37 ENGINE
• Position the kick starter shaft with return
spring.
• Align the spring hook
CD
with slot
®
of
lower crankcase.
• Check the movement of the countershaft and
drive shaft for smoot hness when gea r posi tion
is in neu tra l.
• Apply Suzuki Bond No. 120 7B to the mating
surface of the upper crankcase and part of lower
crankcase in the farrowi ng procedure.
99000-3 1140 Suzuk i Bond No. 1207B
NOTE:
Use of Suzu k i Bond No. 12078 is as follows:
II
Make surface free from moisture, oil, dust
and other foreign materials.
II
Spread on surfaces thinly to form and
even layer and assemble the cases within
few minutes.
II
Take extreme care not to apply any bond
No. 12078 to the bearing surfaces.
Applicable on distorted surface as it forms
a comparatively thick film .
• Tighten the upper and lower crankcase bolts to
the specified torque values.
6mm
6 N·m
Ini tial
(0 .6 kg-ml
tig htening
13 N·m
torque
8mm
(1.3 kg-m l
• Be ca reful of the position of t he clamp when
tighten ing the upper crankcase bolts.