Stator And Pick-Up Coil; Generator Rotor - Suzuki RG250 Service Manual

• Install the gaskets
Q) .
• When securing the lower crankcase, tighten the
8-mm bolts and the 6-mm bolts in the ascending
order of numbers assigned to the bolts, tighten-
ing each bolt a little at a time to equalize the
pressure. Tighten all the securing bolts to the
specified torque values.
Tightening torque
6 mm bolt
9-13N'm
10.9 - 1.3 kg·ml
Final
8
mm
bolt
20 -24 N'm
12 .0 - 2.4 kg·ml
STATOR AND PICK-UP COIL
• Install the stator after 'applying the thread lock
"1342" to the securing screws.
99000·32050
Thread lock " 1342"
GENERATOR ROTOR
• Clean thoroughly both mating surfaces of the
rotor and crankshaft with cleaning solvent.
• Fit key in the key slot on the crankshaft.
• r
nstall the generator rotor.
• Apply a small quantity of Thread Lock "'324"
to the threaded parts of crankshaft.
99000·32120
Thread Lock "1324"
ENGINE 3·38
,
•