Suzuki RG250 Service Manual page 49

~'3
ENGINE
• Loosen the clutch pressure plate bolts
by
using
the special tool.
09910-20115 Conrad holder
• Remove the pressu re plate, drive plate, driven
plate, damper, washer, bearing and push piece.
• Remove the push rod.
• Loosen the clutch sleeve hub nut by using the
special tool.
09920-53710
Clutch sleeve hub holder
• Remove the tachometer drive gear, kick starter
drive gear, kick starter, spring, kick idle gear and
gear shift shaft.
09900-06107 Snap ring pliers
•
•
--
,