Menu Overview; Touchscreen Display; Print / Setup; Navigation - 3D Systems CubePro User Manual

MENU OVERVIEW

TOUCHSCREEN DISPLAY

After powering on the printer and turning on the touchscreen display, touch the
display to continue .
CAUTION: When using the touchscreen, use only light finger
pressure to make selections . Using anything sharp will damage the
touchscreen display and will void the manufacturer's warranty .

PRINT / SETUP

PRINT allows the user to print a creation stored either on a USB mass storage
device or from the CubePro software . You can invent your own creation by using
Cubify Invent software available at www .Cubify .com .
SETUP allows the user to configure the printer, connect to a wireless or ad hoc
network, install cartridges, or view the printer status .

NAVIGATION

Navigation between screens is performed by pressing the right or left arrows .

MATERIALS

Cartridge Status

CARTRIDGE STATUS allows the user to view the type and color of the material that
is installed . It also displays the estimated amount of material left in the cartridge .

Change Cartridge

Selecting CHANGE CARTRIDGE
or replace installed cartridges .
3D Systems, Inc.
allows the user to install cartridges in empty bays
18