Offset Jets Calibration Procedure
The following procedure demonstrates calibrating print jets 1 and 2 on the X-axis . Calibrating the Y-axis is the same procedure . The
illustration below will be used for demonstration purposes . Be sure to refer to the actual scale printed by your printer and adjust the
settings accordingly .
www .Cubify .com
1 .
Browse to
Select CubePro .
2 .
Test Print
Files .
3 .
Select
NOTE: The file will begin to download.
4 .
Extract the file and save it to a mass storage device.
3D Systems, Inc.
and select the Cubes + dropdown menu .
71