3D Systems CubePro User Manual page 15

8 . Pull the protective bag down around the printer and remove the printer
assembly from the lower foam support .
9 . Position the printer where it will be used .
NOTE: Ensure the printer is placed in a location where its size and
weight will be properly supported .
10 . Verify the contents in the accessories tray . The boxes contain the following: tool
kit (A), 1-3 print cartridges (B) depending on the printer configuration, jet wiper
and glue bottles (C), and power cord (D) .
3D Systems, Inc. 11
A B
C D
B B