Unpacking And Setting Up Your Cubepro - 3D Systems CubePro User Manual

UNPACKING AND SETTING UP YOUR CUBEPRO

CAUTION: Due to the size and weight of the printer, this procedure may require more than one person . Ensure
there are enough people to safely and comfortably move the printer to its final location.
NOTE: Ensure that you save all foam and packing material for the future repacking of your CubePro . Shipping the
printer without original packing materials may cause damage to the printer .
1 . Carefully cut the straps (A) and then pull the tabs (B) on all four release clips .
NOTE: There is one release clip on each side of the box .
2 . Pull the handles (A) and remove the release clips from the outer box .
3D Systems, Inc.
B
8
A
A