3D Systems CubePro User Manual page 54

4 . Move the model into the preferred position on the stage .
NOTE: You can specify the distance you want to move the model by
inputing values in the Move X or Move Y fields and then selecting
Move X or Move
NOTE: Auto Place
optimum position .
NOTE: Selecting
around the stage .
5 . If necessary, scale and rotate the model by entering the values and selecting the
corresponding buttons .
6 . Select the color you wish to use and then select the part .
NOTE: If working with an assembly, select a color and then the part
you wish to change .
NOTE: If you need to replace a cartridge for a different color or
material type, refer to the section
Then, verify the material type and color by reviewing the Printer
Configuration settings under the Settings tab in the software.
7 . Select the color again to deselect it .
Select Build .
8 .
9 . Enter the appropriate build settings and select Build .
NOTE: Refer to the section called
for more information .
10 . Browse to the location where the file will be saved and enter a file name. Select
CubePro Build Files
3D Systems, Inc.
Y .
allows the software to place the model in an
Move Model allows you to click and drag the model
Replacing A Material
Build Settings
as Save As Type . Select Save .
Cartridge .
under the View Tab
50