Cubepro Maintenance; Restoring Roughness To The Print Pad; Cleaning The Jet Wiper - 3D Systems CubePro User Manual

Prosumer 3d printer
Hide thumbs Also See for CubePro:
Table of Contents

Advertisement

11

CUBEPRO MAINTENANCE

RESTORING ROUGHNESS TO THE PRINT PAD

If the print pad is too smooth, the print material and glue may not adhere properly . Using the sandpaper included in the toolkit, wipe
the print pad diagonally across the print pad from corner to corner in both directions . Rinse and thoroughly dry the print pad before
installing it into the printer .

CLEANING THE JET WIPER

In addition to being a scraper for the print jets, the jet wiper assembly is also a refuse bin, collecting print material that has been primed
from the print jets. As the jet wiper fills, it will need to be emptied regularly.
1 .
With the print pad lowered, lift up the jet wiper off the thumbscrew rest .
2 .
Pull the jet wiper up and out to separate the mounting posts from the keyhole
slots .
3 .
Remove the jet wiper assembly from the printer .
4 .
Remove the waste material from the jet wiper and then reinstall it in the CubePro . Refer to the section titled
more information about installing the jet wiper . Recycling information can be found in the section titled
Program .
3D Systems, Inc.
59
Printer Setup
for
Cubify Sustainability

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents