Cubex Main Menu Overview - 3D Systems CubeX Duo User Manual

CUBEX MAIN MENU OVERVIEW

TOUCHSCREEN Tap on the touchscreen to navigate to the main menus using the arrows on the bottom
corners of the touchscreen . To return to the touch screen, pressing the control button .
PRINT View the .cubex files that are saved on your memory stick and select a .cubex file to print.
PRINT
INFO Provides Material Cartridge status and printing status during the printing process .
INFO
PJ-MAP Allows you to re-map your print jets .
PJ-MAP
PJ-CON Allows you to manually jet your print jets, giving you control of temperature and RPM .
PJ-CON
MOVE Manually moves your print jet carriage in the X, Y and Z directions .
MOVE
HOME Sends the print jet carriage to its home position located in the back left corner of the printer .
HOME
LEVEL Level your print pad in relation to the print tips .
LEVEL
Z-GAP Set the distance between the print pad and print tips during the first layer of printing.
Z GAP
Z
OFFSET Set the relative distance between each print tip .
OFFSET
!
Do not use the offset menu unless you have been advised to do so by Cubify support, changing this
may affect the quality of multi-material prints .
UPDATE Used to update CubeX firmware.
UPDATE
12