Menu Overview - 3D Systems CubePro 3D Printer User Manual

MENU OVERVIEW

Touchscreen Display
After powering on the printer and turning on the touchscreen display, touch the display to continue.
CAUTION: When using the touchscreen, use only light finger pressure to make
selections. Using anything sharp will damage the touchscreen display and will void the
manufacturer's warranty.
Print / Setup
PRINT allows the user to print a creation stored either on a USB mass storage device or from the CubePro
software.
SETUP allows the user to configure the printer, connect to a wireless or ad hoc network, install cartridges,
or view the printer status.
Navigation
Navigation between screens is performed by pressing the right or left arrows.
Materials
CARTRIDGE STATUS
displays the estimated amount of material left in the cartridge.
Selecting CHANGE CARTRIDGE
cartridges.
allows the user to view the type and color of the material that is installed. It also
allows the user to install cartridges in empty bays or replace installed