Installing A Material Cartridge - 3D Systems CubePro User Manual

INSTALLING A MATERIAL CARTRIDGE

Before the printer will print a creation, the correct type of cartridge(s) must be installed in the printer . If the printer recognizes that no
cartridge has been installed, the display will prompt you to install the appropriate cartridge .
INSTALL CARTRIDGES .
1 . Select
2 . Select the cartridge to be installed .
NOTE: The print jet will begin to heat .
3 . Open the packaging and remove the
Select the checkmark
3D Systems, Inc.
thumbscrew
to continue .
from the new cartridge .
20