Moving The Print Jets - 3D Systems CubePro User Manual

MOVING THE PRINT JETS

The Print Plate Calibration menu provides a way to manually move the print jets and the print pad . The MOVE JETS utility can be
useful to test the X, Y and Z motors to ensure they are working properly .
1 . To move the print jets or the print pad, select
2 . Select the checkmark
NOTE: The X: up arrow
down arrow moves the print jets to the left .
NOTE: The Y: up arrow
and the Y: down arrow
NOTE: The Z: up arrow
lowers the print pad .
3 . Move the print jets or print pad in the desired direction and select the
when finished.
3D Systems, Inc.
MOVE
to continue .
moves the print jets to the right and the
moves the print jets to the back of the printer
moves the print jets to the front of the printer .
raises the print pad and the
JETS .
X:
Z: down arrow
checkmark
76