Led And Beeper Indications; If You Make A Mistake - Datalogic PowerScan RF Programming Manual

LED and Beeper Indications

If You Make a Mistake...

16
The scanner and Base Station use a set of indicators to verify/announce
the various system functions. See Appendix E: LED and Beeper Indica-
tions on page 203 for more information.
If, during a programming session, you find that you are unsure of the
RF system's settings or wish to reset its configuration, use the Return to
Factory Settings on page 17 to return the configuration to the factory set-
tings. Scanning this bar code will also reset any changes made during
previous programming sessions.
®
PowerScan RF Scanner