Table of Contents
Advertisement
Fixed Length
Format
106
The scanner offers the option of requiring Codabar labels to have one
or two fixed lengths in the Fixed Label Format. Follow the steps below
to set Codabar symbology to Fixed Length Format.
1.
Identify the fixed length settings you want to make.
2.
Scan the SET bar code.
3.
Scan the ENABLE FIXED LENGTH FORMAT bar code.
4.
Scan the SET FIRST FIXED LENGTH bar code.
5.
Set the first fixed label length by scanning the applicable digit
bar codes from the page 108. Return to this page.
NOTE
If you need to set a second fixed length, continue with step six. If you
do not need to set a second fixed length, skip to step nine.
6.
Scan the SET SECOND FIXED LENGTH bar code.
7.
Set the second fixed label length by scanning the applicable
digits bar codes from the page 108.
8.
Return to this page and go to step ten.
NOTE
9.
Scan the NO SECOND FIXED LENGTH bar code.
10. Scan the END bar code.
If you are setting a label length less than ten, you
must scan a zero digit first and then the length
digit (e.g., 04, 06, 08).
If you are setting a label length less than ten, you
must scan a zero digit first and then the length
digit (e.g., 04, 06, 08).
®
PowerScan
RF Scanner
Hide quick links:
Advertisement
Table of Contents
