Datalogic PowerScan RF Programming Manual page 16

10
Base Station
Base Station configuration is primarily performed by first program-
ming a scanner with the desired options, then downloading the config-
uration to the Base Station from that scanner via the barcode Transmit
Scanner Configuration to Base Station on page 11.
Verify that the scanner and Base Station host inter-
face types (RS-232, Keyboard Wedge, etc.) are
matched before attempting to download any config-
uration files or perform any custom programming
sessions. Go to the section Interface Selection and
CAUTION
set the scanner to the Base Station's I/F type.
®
PowerScan RF Scanner