Keyboard Wedge Options; Connect To A Laptop/No Keyboard Attached - Datalogic PowerScan RF Programming Manual

Keyboard Wedge Options

Connect to a
Laptop/No
Keyboard
Attached
42
Keyboard Wedge options are specific to Base Station ONLY
If no keyboard is attached, the scanner must provide the acknowledge
signal to the PC. In this case, enable the "Laptop/No External Key-
board" mode. If a keyboard is attached, enable "Keyboard Attached."
Laptop (integrated keyboard) — provides the acknowledge signal to
the PC when the scanner is connected to a laptop computer or when
the scanner is operated with no external keyboard.
PC (external keyboard) — is enabled when the scanner is connected to
a standard PC.
Send Control Characters — transmits all ASCII characters except NUL
(00h) . Disabling this feature limits transmission of ASCII characters to
the following:
• Only ASCII characters between 20h and 127h, plus.
— Carriage Return (CR=0Dh)
— BackSpace (BS=08h)
— Right Tab (HT=09h)
— Left Tab (0Bh)
— Esc (1Bh)
®
PowerScan RF Scanner