Source-Radio Identification (Id) - Datalogic PowerScan RF Programming Manual

Source-Radio
Identification
(ID)
178
Feature is specific to Base Station ONLY
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 11.
NOTE
This feature allows you to include source-radio identification
sented by six ASCII bytes) along with bar code data transmitted to the
host. Enable this feature to identify the individual scanner sending a
given data transmission. Options for this feature are:
• Do not include source-radio ID
Include source-radio ID as prefix
•
• Include source-radio ID as suffix
1. Each scanner has been pre-configured at the factory with its own unique six-character identifica-
tion (source-radio ID).
1
(repre-
®
PowerScan RF Scanner