Drop Links On Reset Option - Datalogic PowerScan RF Programming Manual

Drop Links on
Reset Option
172
Feature is specific to Base Station ONLY
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 11.
NOTE
When enabled, this option causes the Base Station to drop its links to
any and all scanners whenever power is reset/cycled. This provides a
simple way to ensure that when reconfiguring a system, scanners do
not need to be located and individually unlinked.
SET ------------------------------
Drop all links on
reset
(ENABLE) ---------
Do not drop all links
on reset
(DISABLE) ---------
END ------------------------------
Transmit Scanner
Configuration to
Base Station ---------
®
PowerScan RF Scanner