Transmit Labels In Code 39 Format - Datalogic PowerScan RF Programming Manual

Transmit
Labels in Code
39 Format
RF Programming Manual
Feature is specific to Base Station ONLY
When this feature is enabled, the symbology identifier for the specified
label will be set to Code 39 and the label will be transmitted. No data
checking or conversion is done. Table 4 below shows the symbologies
converted.
Table 4. Symbologies Converted to Code 39
Port
Port 5B
Port 9B
Port 17
Port E
Symbology Converted
Code 128, Code 93, Codabar
Code 93, Codabar
No Effect
No Effect
53