Wait Time Between Retries Of Failed Transmission - Datalogic PowerScan RF Programming Manual

Wait Time
Between
Retries of
Failed
Transmission
RF Programming Manual
Feature is applicable to scanner and Base Station.
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 11.
NOTE
In conjunction with the previous feature, Transmission Retries Before
Message Time-out, this feature defines the duration of time the system
must wait before re-trying a transmission of data between the scanner
and the Base Station. Consideration for this setting would be to ensure
that enough time elapses between tries to avoid encountering the
source of the original transmission conflict, while being short enough
to avoid causing a substantial increase in the time required to success-
fully transmit the message.
167