Appendix E: Led And Beeper Indications - Datalogic PowerScan RF Programming Manual

Appendix E: LED and Beeper Indications

NOTE
LED
INDICATION
100ms on, 900 ms off
Disable
Indication
Good Read
500 ms on
Indication
500 ms on, 500 ms off
Program Mode
Continuous flashing
Indication
Varies. Consists of a long flash
Field Replace-
followed by multiple short
able Unit (FRU)
flashes.
Indications
Two flashes at 100 ms on, 350
Low Battery
ms off.
Indication
RF Programming Manual
The Base Station LED indicators and the scanner's LEDs and beeper
are used to announce system status and perform other useful signals.
The tables below list the default function of each of the various indica-
tors.
Some LED and beeper indications can be disabled or modified via scan-
ner programming. The tables indicate the default behavior of the indica-
tors, with shaded rows representing features that are programmable.
Table 9. Scanner GREEN LED Functions
DURATION COMMENT
Indicates the scanner has been disabled.
Indicates a bar code has been read and decoded.
Indicates the scanner is in Programming Mode.
Enables service technicians to identify Field Replace-
able Unit (FRU) errors.
Occurs at trigger pull before the laser is enabled. Indi-
cates the battery is in need of recharging.
203