Configuring The Standard 2 Of 5 Options - Datalogic PowerScan RF Programming Manual

Configuring
the Standard 2
of 5 Options
134
Standard 2 of 5 options are all applicable only to the scanner,
with the exception of Check Digit Transmission, which applies
only to the Base Station.
Use the special bar codes in this section to configure the Standard
2 of 5/IATA symbology options.
Check Digit
SET -------------------------------
Don't Calculate ---------
Calculate ---------
Don't Transmit ---------
Transmit ---------
END ------------------------------
Transmit Scanner
Configuration to
Base Station ---------
®
PowerScan RF Scanner