Drop Oldest
Links Option
RF Programming Manual
Feature is specific to Base Station ONLY
Remember, programming changes to the Base Station
have no effect until the new configuration is downloaded
via the feature Transmit Scanner Configuration to Base
Station on page 11.
NOTE
This feature can be enabled to better manage the linking of new scan-
ners to a multi-point system. Here's how it works: When a new scanner
is linked to a Base Station that is already linked to its maximum
amount of scanners, the earlier-linked scanner that has been inactive
for the longest period of time will be automatically unlinked from the
system to make room for the new scanner.
When this feature is disabled, scanners can be linked up to the maxi-
mum number set via the programming feature, Set Maximum Linked
Scanners, or the default maximum, which is eight scanners. Attempts to
link additional scanners beyond these limits will fail.
SET -------------------------------
Drop oldest links
(ENABLE)
---------
Do not drop oldest
links
(DISABLE)
---------
END ------------------------------
Transmit Scanner
Configuration to
Base Station ---------
173