Wait Time For Ack - Datalogic PowerScan RF Programming Manual

Wait Time for
ACK
164
Feature is applicable to scanner and Base Station.
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 11.
NOTE
This setting defines a time period allowed once the scanner has sent
data to the Base Station for that Base Station to send an acknowledge-
ment (ACK) back to the scanner, signalling receipt of the data. This fea-
ture is used to streamline the scanning speed of your system.
®
PowerScan RF Scanner