Table of Contents
Advertisement
Prestige 128IMH User's Guide
been dropped by the remote device that you dialed in to. Make sure that the
configuration parameters between these two devices are consistent.
17.5.
Prestige
1. First verify that you have configured the authentication parameters in menu 13. These
would be CLID Authen, Recv. Authen and Mutual Authen.
2. In menu 14, verify the user name and password for the remote dial-in user.
3. If the remote dial-in user is negotiating IP, verify that the IP address is supplied
correctly in menu 13. Check that either the remote dial-in user is supplying a valid IP
addressor that the Prestige is assigning a valid address from the IP pool.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Problems for a remote user connecting to a
ZyXEL
Page 17-3
Advertisement
Table of Contents
