ZyXEL Communications Prestige 128IMH User Manual page 118

ZyXEL
Manual Call
Internet Setup
Test
Ping Host
Reboot System
Command Mode
Table 16-1 Fields in Menu 24.4 - System Maintenance - Diagnostic
Figure 16-2 Trace Display for a Successful IPCP Connection via Manual Call
Below is an example of the Trace Display for a failed call.
Page 16-8
will succeed. Otherwise, note the error message that you receive
and consult your network administrator.
This provides a way for you to place a manual call to a remote node.
This tests the connectivity to that remote node. When you use this
command, you see traces displayed on the screen showing what is
happening during the call setup and protocol negotiation. Below is
an example of a successful connection.
This test checks to see if your Internet access configuration has
been done correctly. When this option is chosen, the Prestige places
a manual call to the ISP remote node. If everything is working
properly, you will receive an appropriate response. Otherwise, note
the error message and consult your network administrator.
This diagnostic test pings the host, which determines the
functionality of the TCP/IP protocol on both systems.
This option reboots the Prestige. This serves to implement any
changes that may have been recently added to your system.
This option allows you to enter the command mode. This mode
allows you to diagnose and test your Prestige using a specified set
of commands.
Prestige 128IMH User's Guide
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C