Table 12-3 Troubleshooting The Lan Interface; Problems With The Wan Interface; Problems With The Lan Interface; Problems Connecting To A Remote Node Or Isp - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Internet Access Router

12.2 Problems With the WAN Interface

Table 12-2
Problem
Initialization of the PVC
connection failed.

12.3 Problems with the LAN Interface

Table 12-3
Problem
Can't ping any station on the LAN

12.4 Problems Connecting to a Remote Node or ISP

Table 12-4
Problem
Can't connect to a remote node or
ISP
12-2
Troubleshooting the ADSL connection
Corrective Action
Ensure that the cable is connected properly from the ADSL port to the wall
jack. The ADSL LED on the front panel of the Prestige should be on. Check
that your VPI, VCI, type of encapsulation and type of multiplexing settings are
the sama as what you collected from your telephone company and ISP. Reboot
the Prestige. If you still have problems, you may need to verify these variables
with the telephone company and/or ISP.
Troubleshooting the LAN Interface
Corrective Action
Check the Ethernet LEDs on the front panel. The LED should be
on for a port that has a station connected. If it is off, check the
cables between your Prestige and the station.
Verify that the IP address and the subnet mask are consistent
between the Prestige and the workstations.
Troubleshooting a Connection to a Remote Node or ISP
Corrective Action
Check Menu 24.1 to verify the line status. If it indicates [down], then
refer to the section on the line problems.
In Menu 11.1, verify your login name and password for the remote
node.
Troubleshooting